LOCTITE EDAG 1415M

Harmonization Code : 3506.10.00.00 | Prepared glues and other prepared adhesives, not elsewhere specified or included; products suitable for use as glues or adhesives, put up for retail sale as glues or adhesives, not exceeding a net weight of 1 kg

LOCTITE EDAG 1415M

Main features

  • Silver-Filled Coating Application
  • Low-Resistance Coating Application
  • No Primer or Topcoat Required

Product Description

LOCTITE® EDAG 1415M E&C is a silver-filled thermoplastic conductive coating developed to provide electromagnetic compatibility (EMC) and EMI shielding protection for electronic equipment enclosures. The coating is compatible with many engineering plastics and delivers low surface resistance, high attenuation performance, and excellent environmental durability without requiring a primer or top coat. It can be applied by spray or brush and air dries rapidly for efficient production processing.

Key Features & Benefits

  • Silver-filled thermoplastic conductive coating.
  • Designed for EMC and EMI shielding applications.
  • Maintains low resistance after environmental exposure.
  • No primer or top coat required.
  • Suitable for spray or brush application.
  • Fast air-dry processing with optional forced drying.
  • Compatible with plastics used in electronic enclosures.

Recommended Applications

  • EMI shielding of plastic electronic housings.
  • EMC compliance coatings.
  • Electronic equipment enclosures.
  • Conductive coating applications requiring low resistance.
  • Industrial electronic assemblies and housings.
Product Family

LOCTITE EDAG 1415M

Loading pricing…
TDS, SDS & Technical Documents

Technical Specifications

General Properties
Appearance
Appearance at room temperature.
Silver
Density
Volumetric mass per unit
1,630 kg/m3
Solids
58 %
Physical Properties
Viscosity
Viscosity is a measurement of a fluid’s resistance to flow. Viscosity is commonly measured in centiPoise (cP). One cP is defined as the viscosity of water and all other viscosities are derived from this base. MPa is another common unit with a 1:1 conversion to cP. A product like honey would have a much higher viscosity -around 10,000 cPs- compared to water. As a result, honey would flow much slower out of a tipped glass than water would. The viscosity of a material can be decreased with an increase in temperature in order to better suit an application
375 mPa.s
Thermal Properties
Flash Point
The flashpoint of a solvent is the lowest possible temperature at which it can vaporize to form an ignitable vapor. Flashpoint is often confused with “autoignition temperature”, which is the temperature at which a solvent ignites without an ignition source.
14 °C

Additional Information

Technical Properties

As-Supplied / Before-Processing Properties

Property Value Unit Condition
Technology Thermoplastic Conductive Coating — Silver-filled EMC coating
Appearance Silver — As supplied
Solids Content 58 % Typical
Viscosity 375 mPa·s (cP) Brookfield, 20°C, 20 rpm
Density 1,630 kg/m³ Typical
Theoretical Coverage 9 m²/kg 10 μm coating thickness
Shelf Life 18 months 5 to 30°C storage
Flash Point 14 °C Typical
Operating Temperature 105 °C Maximum service temperature
Technical Properties

After-Processing / Final-State Properties

Property Value Unit Condition / Method
Recommended Coating Thickness 10 - 15 μm For EMI shielding performance
Attenuation 60 dB 1,000 MHz, 25 μm thickness
Sheet Resistance <0.015 Ω/sq 25 μm coating thickness
Dry to Touch Time 10 minutes Ambient conditions
Handling Time 20 minutes Approximate
Air Dry Time 4 - 8 hours Good coating properties achieved
Recommended Drying Cycle 30 min @ 70-80 °C Forced drying improves conductivity
Spray Pressure 2.0 - 2.5 bar Recommended application setting
Nozzle Diameter 1.0 - 1.5 mm Spray application

Leading Brands Trust in Our Products and Services

Products that Perform| Knowledge that Serves| Service that Delivers