LOCTITE EA 9017

Harmonization Code : 3214.10.00 | Putty and other mastics | Resin cements, caulking compounds and other mastics

LOCTITE EA 9017

Main features

  • Premeasured Resin-Hardener Pack
  • Fast 4-6-Minute Handling
  • Machinable Cured Epoxy Finish

Product Description

LOCTITE EA 9017 is a two-component, room-temperature-curing epoxy adhesive supplied in a premeasured syringe pack for permanent bonding and repair. The clear water-white-to-amber liquid reaches handling strength in 4 to 6 minutes and full cure in 45 to 60 minutes. It bonds metals, ceramics, concrete, wood, glass and most plastics, while the cured material can be drilled, tapped, sanded, machined and painted. Applications include production, maintenance and prototype bonding, plus filling and sealing holes, cracks and worn surfaces.

Key features

  • Premeasured syringe pack: Resin and hardener are supplied in measured quantities for consistent mixing and application.
  • Fast handling and cure: Handling strength develops in 4 to 6 minutes, with full cure in 45 to 60 minutes.
  • Machinable cured epoxy: The cured material can be drilled, tapped, sanded, machined and painted.

Applications

Applications include bonding metals, ceramics, concrete, wood, glass and most plastics, plus repairing, filling and sealing holes, cracks and worn surfaces.

Product Family

LOCTITE EA 9017

Loading pricing…
TDS, SDS & Technical Documents

Technical Specifications

General Properties
Appearance
Appearance at room temperature.
Clear water white to amber liquid / Translucent
Specific Gravity
Specific gravity (SG) is the ratio of the density of a substance to the density of a reference substance; equivalently, it is the ratio of the mass of a substance to the mass of a reference substance for the same given volume. For liquids, the reference substance is almost always water (1), while for gases, it is air (1.18) at room temperature. Specific gravity is unitless.
1.13 - 1.17
Thermal Properties
Flash Point
The flashpoint of a solvent is the lowest possible temperature at which it can vaporize to form an ignitable vapor. Flashpoint is often confused with “autoignition temperature”, which is the temperature at which a solvent ignites without an ignition source.
>93 °C

Additional Information

Technical properties

As-supplied properties

Typical uncured-product values.

Property Value Unit Method / condition
Chemical typeEpoxy and resinTwo-component system
AppearanceClear water-white to amber liquidUncured
Specific gravity1.13 to 1.17Uncured
Storage range8 to 28deg CUnopened container in a cool, dry location
Technical properties

Final-state properties

Typical cured-product values unless otherwise stated.

Property Value Unit Method / condition
Cured appearanceTranslucentFully cured material
Shear strength2,300psiASTM D 1002
Temperature resistanceUp to 149deg CCured adhesive

Leading Brands Trust in Our Products and Services

Products that Perform| Knowledge that Serves| Service that Delivers