LOCTITE 713

Harmonization Code : 3506.10.00.00 | Prepared glues and other prepared adhesives, not elsewhere specified or included; products suitable for use as glues or adhesives, put up for retail sale as glues or adhesives, not exceeding a net weight of 1 kg

LOCTITE 713

Main features

  • Pre- or Post-Applied Activation
  • Rapid 30-Second Drying
  • Short Controlled On-Part Window

Product Description

LOCTITE SF 713 is a transparent, colorless to slightly amber, very-low-viscosity cyanoacrylate activator for pre- or post-application cure acceleration. The amine active ingredient is supplied in isopropanol and dries in 30 seconds or less at 20 deg C. Its short on-part life of one minute or less supports rapid, controlled assembly sequences rather than long staging intervals. The activator is used with compatible cyanoacrylate adhesives to secure wires or coils to printed circuit boards, tamperproof adjustable components, and mount stand-offs, edge guides, or board stiffeners.

Key features

  • Pre- or post-application use: The activator can be applied before adhesive placement or to exposed adhesive afterward.
  • Rapid 30-second drying: The isopropanol carrier dries in 30 seconds or less at 20 deg C.
  • Short controlled process window: On-part activity lasts one minute or less under the listed condition.

Applications / Suitable for

  • Securing wires and coils to printed circuit boards
  • Tamperproofing adjustable components
  • Mounting stand-offs, edge guides, and board stiffeners
Product Family

LOCTITE 713

Loading pricing…
TDS, SDS & Technical Documents

Technical Specifications

General Properties
Appearance
Appearance at room temperature.
Transparent colorless to slightly amber liquid
Chemistry Type
Amine (active ingredient)
Specific Gravity
Specific gravity (SG) is the ratio of the density of a substance to the density of a reference substance; equivalently, it is the ratio of the mass of a substance to the mass of a reference substance for the same given volume. For liquids, the reference substance is almost always water (1), while for gases, it is air (1.18) at room temperature. Specific gravity is unitless.
0.8
Physical Properties
Viscosity
Viscosity is a measurement of a fluid’s resistance to flow. Viscosity is commonly measured in centiPoise (cP). One cP is defined as the viscosity of water and all other viscosities are derived from this base. MPa is another common unit with a 1:1 conversion to cP. A product like honey would have a much higher viscosity -around 10,000 cPs- compared to water. As a result, honey would flow much slower out of a tipped glass than water would. The viscosity of a material can be decreased with an increase in temperature in order to better suit an application
1 mPa.s
Physical Properties
Drying Time
≤30 seconds
General Properties
Solvent
Isopropanol

Additional Information

Technical properties

As-supplied / before-processing properties

Typical values and characteristics for the product before cure, application, or assembly.

PropertyValueUnitMethod / condition
AppearanceTransparent, colorless to slightly amber liquid-As supplied
Active ingredientAmine-1.7% to 2.3%
SolventIsopropanol-Carrier
Specific gravity0.8-25 deg C
Viscosity1mPa s20 deg C
Drying time<=30s20 deg C
On-part life<=1minAfter application

Leading Brands Trust in Our Products and Services

Products that Perform| Knowledge that Serves| Service that Delivers