Hysol MG15F-35A | Black Epoxy Mold Compound
Harmonization Code : 3907.30.00.85 | Polyacetals, other polyethers and epoxide resins, in primary forms; polycarbonates, alkyd resins, polyallyl esters and other polyesters, in primary forms : Epoxide resins : Other
Main features
- Anhydride cured
- Tg: 190°C
- For high voltage & high power discretes
Product Description
Hysol MG 15F-35A epoxy molding compound delivers outstanding performance and ease of use. It is an anhydride cured molding compound designed specifically for use in high voltage power applications requiring good electrical stability at high temperature.
Hysol MG 15F-35A is a heat curable epoxy with good electrical and high temperature stability, typicall used for power discrete and high voltage rectifiers. It meets UL 94 V-0 Flammability at 3mm thickness.
HYSOL MG15F-35A
1. Select Product Form
2. Select Pellet Size
3. Select Pellet Weight
4. Select Package Size
Loading pricing…
Product availability 
Shipping in 12 weeks
Shipping in 12 weeks
Shipping in 12 weeks
Shipping in 12 weeks Shipping in 12 weeks Shipping in 12 weeksPackaging
Please select Product Form, Pellet Size, Pellet Weight and Package Size.
TDS, SDS & Technical Documents
Technical Specifications
General Properties
Color
Black
The color
Specific Gravity
1.82
Specific gravity (SG) is the ratio of the density of a substance to the density of a reference substance; equivalently, it is the ratio of the mass of a substance to the mass of a reference substance for the same given volume.
For liquids, the reference substance is almost always water (1), while for gases, it is air (1.18) at room temperature. Specific gravity is unitless.
Physical Properties
Spiral Flow @ 175°C
64 cm
Thermal Properties
Glass Transition Temperature (Tg)
190 °C
The glass transition temperature for organic adhesives is a temperature region where the polymers change from glassy and brittle to soft and rubbery. Increasing the temperature further continues the softening process as the viscosity drops too. Temperatures between the glass transition temperature and below the decomposition point of the adhesive are the best region for bonding.
The glass-transition temperature Tg of a material characterizes the range of temperatures over which this glass transition occurs.
Thermal Conductivity
0.7 W/m.K
Thermal conductivity describes the ability of a material to conduct heat. It is required by power packages in order to dissipate heat and maintain stable electrical performance.
Thermal conductivity units are [W/(m K)] in the SI system and [Btu/(hr ft °F)] in the Imperial system.
UL 94 Rating
V0
Flammability rating classification.
It determines how fast a material burns or extinguishes once it is ignited.
HB: slow burning on a horizontal specimen; burning rate less than 76 mm/min for thickness less than 3 mm or burning stops before 100 mm
V-2: burning stops within 30 seconds on a vertical specimen; drips of flaming particles are allowed.
V-1: burning stops within 30 seconds on a vertical specimen; drips of particles allowed as long as they are not inflamed.
V-0: burning stops within 10 seconds on a vertical specimen; drips of particles allowed as long as they are not inflamed.
5VB: burning stops within 60 seconds on a vertical specimen; no drips allowed; plaque specimens may develop a hole.
5VA: burning stops within 60 seconds on a vertical specimen; no drips allowed; plaque specimens may not develop a hole
Mechanical Properties
Molded Shrinkage
0.5 %
Curing Conditions
Transfer Pressure
40 - 80 kg/cm2
Transfer Time
6 - 15 s
