Humiseal Thinner 521EU
Harmonization Code : 3814001000 |
Main features
- RoHS Directive 2002/95/EC compliant
- For use with HumiSeal conformal coatings
- Ensures proper viscosity adjustment
Product Description
When necessary, the viscosity of HumiSeal coatings may be adjusted for application purposes. HumiSeal Thinner 521 EU is specially formulated to maintain the original system balance when added to the correct coating type. It is in full compliance with the RoHS Directive 2002/95/EC. The “EU” designation indicates that the product has been formulated for the European Union.
Product Key Features
- Fully compliant with RoHS Directive 2002/95/EC
- Designed specifically for European Union requirements
Applications
HUMISEAL 521EU
1. Select Package Type
Loading pricing…
Product availability 
Shipping in 6 weeks
Shipping in 6 weeksPackaging
Please select Package Type.
TDS, SDS & Technical Documents
Technical Specifications
General Properties
Color
Clear
The color
Evaporation Rate
0.6
Specific Gravity
0.86
Specific gravity (SG) is the ratio of the density of a substance to the density of a reference substance; equivalently, it is the ratio of the mass of a substance to the mass of a reference substance for the same given volume.
For liquids, the reference substance is almost always water (1), while for gases, it is air (1.18) at room temperature. Specific gravity is unitless.
Vapor Pressure
0.0244712 kg/cm2
Thermal Properties
Boiling Point
137 °C
The amount of degree’s needed to reach in order to make the substance boil.
Flash Point
30 °C
The flashpoint of a solvent is the lowest possible temperature at which it can vaporize to form an ignitable vapor.
Flashpoint is often confused with “autoignition temperature”, which is the temperature at which a solvent ignites without an ignition source.
Additional Information
Directions for Use
Add HumiSeal® Thinner to a compatible coating until the desired viscosity is obtained.
Handling Precautions
HumiSeal Thinners are flammable and the following standard safety precautions should be observed:
- Use only in well ventilated areas.
- Protective gloves and goggles should be worn.
- In case of prolonged skin contact, wash with water.
- In case of eye contact, flush with water and contact physician.
- Avoid prolonged breathing of vapours.
- Unused portions of HumiSeal® products must be disposed of in strict compliance with Local, State, and Federal laws governing such matters.
- Consult the Material Safety Data Sheet (MSDS/SDS) for more specific product information.
