EPOCURE 46505

Harmonization Code : 3506.91.90.99 | Prepared glues and other prepared adhesives, not elsewhere specified or included; products suitable for use as glues or adhesives, put up for retail sale as glues or adhesives, not exceeding a net weight of 1 kg ; Adhesives based on polymers of headings 3901 to 3913 or on rubber; Other ; Other

EPOCURE 46505

Main features

  • Filter-Media-to-Metal End-Cap Bonding
  • Synthetic-Lubricant and Motor-Oil Resistance
  • 125-Minute Gel Window

Product Description

EPOCAP® 46505 / EPOCURE® 50114 is a filled, two-component, room temperature curing epoxy system designed primarily for bonding and sealing filter media to metal end caps. It is also highly effective for the potting and encapsulation of various electrical and electronic components, offering exceptional resistance to synthetic lubricants and motor oil.

Key features

  • Excellent chemical resistance: Delivers outstanding durability against exposure to synthetic lubricants and motor oils.
  • Optimized for processing: Formulated with non-abrasive fillers and an extended 125-minute gel time to accommodate complex potting and dispensing tasks.
  • Versatile performance: Cures completely at room temperature while maintaining a strong 85 Shore D hardness for robust mechanical protection.

Applications / Suitable for

  • Bonding and sealing filter media to metal end caps.
  • Potting and encapsulation of transformers, coils, switches, and connectors.
  • Protecting electrical and electronic components in lubricant-exposed environments.
Product Family

EPOCURE 46505

Loading pricing…
TDS, SDS & Technical Documents

Technical Specifications

General Properties
Color
The color
Neutral
Specific Gravity
Specific gravity (SG) is the ratio of the density of a substance to the density of a reference substance; equivalently, it is the ratio of the mass of a substance to the mass of a reference substance for the same given volume. For liquids, the reference substance is almost always water (1), while for gases, it is air (1.18) at room temperature. Specific gravity is unitless.
1.42 g/cm³
Physical Properties
Viscosity
Viscosity is a measurement of a fluid’s resistance to flow. Viscosity is commonly measured in centiPoise (cP). One cP is defined as the viscosity of water and all other viscosities are derived from this base. MPa is another common unit with a 1:1 conversion to cP. A product like honey would have a much higher viscosity -around 10,000 cPs- compared to water. As a result, honey would flow much slower out of a tipped glass than water would. The viscosity of a material can be decreased with an increase in temperature in order to better suit an application
8,000 (Mixed) mPa.s

Additional Information

Technical properties

As-supplied / before-processing properties

Pre-cure processing characteristics of mixed EPOCAP® 46505 / EPOCURE® 50114.

Property Value Unit Method / condition
Appearance / Color (Mixed) Neutral - -
Mix Ratio (Weight) 100:18 - Part 46505 to Part 50114
Mix Ratio (Volume) 100:28 - Part 46505 to Part 50114
Viscosity (Mixed) 8,000 cps at 25°C
Specific Gravity (Mixed) 1.42 - at 25°C
Gel Time 125 minutes 100 gm mass at 25°C
Filler Type Non-Abrasive - Present in Part 46505
Technical properties

After-processing / final-state properties

Typical cured mechanical and thermal properties of EPOCAP® 46505 / EPOCURE® 50114.

Property Value Unit Method / condition
Hardness 85 Shore D Tested at 25°C
Heat Distortion Temperature 50 °C -
Thermal Conductivity 3.55 x 10^-4 cal x cm/sec x cm² x °C -

Leading Brands Trust in Our Products and Services

Products that Perform| Knowledge that Serves| Service that Delivers