CONATHANE AD-6415

Harmonization Code : 3910.00.00.90 | Silicones in Primary Forms; Others

CONATHANE AD-6415

Main features

  • Two-Part Polyurethane Adhesive
  • 1:2 Cartridge or Bulk
  • Filtration Membrane Bonding

Product Description

CONAP AD-6415 Polyurethane Adhesive is a two-component, unfilled polyurethane adhesive and sealant for filtration membrane assemblies. The product is supplied in 1:2 cartridge and bulk formats for controlled component proportioning during application. It is designed for bonding and sealing ceramic and flat-sheet filtration membranes, combining adhesive and sealing functions within the supported assembly process. Component preparation, mixing, dispensing and cure conditions should follow the requirements for the selected package. The complete two-part configuration must be used to develop the intended bonded and sealed assembly.

Key features

  • Two-Component Polyurethane: combines an unfilled resin and curative system for bonding and sealing
  • 1:2 Processing Format: is supplied in cartridge or bulk configurations for controlled proportioning
  • Filtration Membrane Application: supports ceramic and flat-sheet membrane bonding and sealing

Applications

Bonding and sealing ceramic and flat-sheet filtration membranes.

Product Family

CONATHANE AD-6415

Loading pricing…
TDS, SDS & Technical Documents

Technical Specifications

Mechanical Properties
Elongation
Elongation is the process of lengthening something. It is a percentage that measures the initial, unstressed, length compared to the length of the material right before it breaks. It is commonly referred to as Ultimate Elongation or Tensile Elongation at break.
520 %
Physical Properties
Viscosity
Viscosity is a measurement of a fluid’s resistance to flow. Viscosity is commonly measured in centiPoise (cP). One cP is defined as the viscosity of water and all other viscosities are derived from this base. MPa is another common unit with a 1:1 conversion to cP. A product like honey would have a much higher viscosity -around 10,000 cPs- compared to water. As a result, honey would flow much slower out of a tipped glass than water would. The viscosity of a material can be decreased with an increase in temperature in order to better suit an application
15,000 mPa.s

Leading Brands Trust in Our Products and Services

Products that Perform| Knowledge that Serves| Service that Delivers