BONDERITE L-GP-D148A

Harmonization Code : 3506.91.90.99 | Prepared glues and other prepared adhesives, not elsewhere specified or included; products suitable for use as glues or adhesives, put up for retail sale as glues or adhesives, not exceeding a net weight of 1 kg ; Adhesives based on polymers of headings 3901 to 3913 or on rubber; Other ; Other

BONDERITE L-GP-D148A

Main features

  • PTFE Dry-Film Lubricant Formation
  • Spray-Viscosity Thinning Compatibility
  • Room-Temperature Cure with Heat Acceleration

Product Description

BONDERITE L-GP D 148A is the PTFE-based varnish component of a two-part dry-film lubricant system. It is combined with the separately supplied BONDERITE S-OT Durcisseur hardener, and the blended resin and hardener are adjusted to spray viscosity using thinner. After application, the mixed system cures at room temperature in approximately 24 hours to form a smooth, dry, PTFE-lubricating film; heat can be used to accelerate the cure. Because this product is one component of a matched two-part system, its final coating performance depends on correct combination and cure with the BONDERITE S-OT Durcisseur hardener as directed in the manufacturer's technical documentation.

Key features

  • PTFE Dry-Film Lubricant Chemistry: PTFE-based varnish that develops a dry, lubricating coating after curing
  • Two-Component System with S-OT Durcisseur: requires the separately supplied BONDERITE S-OT Durcisseur hardener as a matched two-part system
  • Spray-Viscosity Thinning and Room-Temperature Cure: blend is adjusted to spray viscosity with thinner and cures in about 24 hours at room temperature, with heat-accelerated options

Applications

Applications include dry-film lubrication of metal components after the product is mixed and cured with the BONDERITE S-OT Durcisseur hardener.

Product Family

BONDERITE L-GP-D148A

Loading pricing…
TDS, SDS & Technical Documents

Technical Specifications

General Properties
Appearance
Appearance at room temperature.
Viscous green liquid
Chemistry Type
PTFE dispersion in solvent
Density
Volumetric mass per unit
1,280 kg/m3
Solids
51 to 53 %
Physical Properties
Viscosity
Viscosity is a measurement of a fluid’s resistance to flow. Viscosity is commonly measured in centiPoise (cP). One cP is defined as the viscosity of water and all other viscosities are derived from this base. MPa is another common unit with a 1:1 conversion to cP. A product like honey would have a much higher viscosity -around 10,000 cPs- compared to water. As a result, honey would flow much slower out of a tipped glass than water would. The viscosity of a material can be decreased with an increase in temperature in order to better suit an application
100 to 200 mPa.s
Thermal Properties
Flash Point
The flashpoint of a solvent is the lowest possible temperature at which it can vaporize to form an ignitable vapor. Flashpoint is often confused with “autoignition temperature”, which is the temperature at which a solvent ignites without an ignition source.
-4 °C

Leading Brands Trust in Our Products and Services

Products that Perform| Knowledge that Serves| Service that Delivers