3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810
Harmonization Code : 3506.91.90.99 | Prepared glues and other prepared adhesives, not elsewhere specified or included; products suitable for use as glues or adhesives, put up for retail sale as glues or adhesives, not exceeding a net weight of 1 kg ; Adhesives based on polymers of headings 3901 to 3913 or on rubber; Other ; Other
Main features
- Tough, durable bonds
- Minimal surface prep
- Excellent shear and peel strength
Product Description
3M™ Scotch-Weld™ DP810 Low Odor Acrylic Adhesives is a two-part, 1:1 mix ratio, toughened structural adhesive with less odor than most acrylic adhesives. DP810 has excellent shear and peel strength along with good impact resistance and durability. It can quickly bond to most metals, ceramics, rubbers, plastics and wood with minimal surface preparation.
Product Key Features
- Tough, durable bonds
- Low odor acrylic adhesive
- Minimal surface prep
- 10-minute work life
- 20-minute time to handling strength
- 1:1 mix ratio
- Excellent shear and peel strength
- Bonds stainless steel
Technical Specifications
General Properties
Chemistry Type
Acrylic
Color
Green/White
The color
Mix Ratio
1:1
The amount of a constituent divided by the total amount of all other constituents in a mixture
Work life @25°C
0.17 hours
Work life is the amount of time we have to work with a material until it is no longer able to be easily worked and applied on a substrate.
It is based on the change in viscosity and it can rely on the application requirements.
Physical Properties
Viscosity
18,000 - 22,000 mPa.s
Viscosity is a measurement of a fluid’s resistance to flow.
Viscosity is commonly measured in centiPoise (cP). One cP is defined as
the viscosity of water and all other viscosities are derived from this base. MPa is another common unit with a 1:1 conversion to cP.
A product like honey would have a much higher viscosity -around 10,000 cPs-
compared to water. As a result, honey would flow much slower out of a tipped glass than
water would.
The viscosity of a material can be decreased with an increase in temperature in
order to better suit an application
